Maxim Integrated Analog Essentials Getting Started Guide for LX9 and Nexys3 - Manual (Page 6)

Analog Essentials Getting Started Guide
6
For LX9 and Nexys-3
d. Review the SDK IDE. The Project Explorer in the upper left tab should have three components as shown
in the image below. If all three subfolders are present, you can skip the next step.
e. If the Project Explorer does not contain these three subfolders, launch the File > Import menu, expand
the General tab and select Existing Projects into Workspace. Click Next. Set the root directory to
C:\designs\maxim\v1_4\sdkWorkspace, and the missing
p rojects should appear in SDK Project explorer
with their checkboxes checked. Click Finish to import the projects.