Maxim Integrated 78M6610+PSU Evaluation Kit - Manual (Page 9)

78M6610+PSU Evaluation Kit User Manual
Rev 2 9
2.3 Basic Connection Setup
Figure 1 shows the basic connections of the 78M6610+PSU Evaluation Kit for use with external equipment.
The shunt adaptor board consists of the host side components necessary for the evaluation environment that
would be replaced by the target system. This host board provides a USB serial UART controller, serial
interface DC-DC power isolator, a current shunt, and AC wiring terminals.
After connecting the USB cable to J11 and installing the USB drivers, one can plug the 78M6610+PSU
Evaluation Board into the Shunt Adaptor Board as shown below.
Figure 2: 78M6610+PSU Evaluation Board
Figure 3: 78M6610+PSU Evaluation Kit Connections
Connector to Shunt
Adaptor Board