Maxim Integrated 78M6610+PSU Evaluation Kit - Manual (Page 10)

78M6610+PSU Evaluation Kit User Manual
10 Rev 2
Attach an AC source and AC load to the Shunt Adaptor Board as shown below. Connect J1 and J3 to an
external AC power source. Connect J2 and J4 to the load to be measured. The 78M6610+PSU Evaluation Kit
hardware is designed for 120 VAC and 230 VAC (nominal) up to 300 VAC (max).
Figure 4: Shunt Adaptor Board Connections
USB
Connector
AC Load
Earth GND
AC Source
Earth GND
AC Load
LINE
AC Source
LINE
AC Load
NEUTRAL
AC Source
NEUTRAL