Longshine LCS-KL-2716M - Manual (Page 7)

6
3. Requirements
KVM Switch Extra Console ( Remote Control ):
The following hardware components are required for the extra external console:
A VGA, SVGA, or multisync monitor capable of displaying the highest resolution
provided by any computer in the installation.
A PS/2 or USB keyboard and mouse
Computers
The following equipment must be installed on each computer:
A VGA, SVGA, or multisync video graphics card with an HDB-15 port.
Note: The maximum resolution of integrated LCD monitors is 1280 x 1024.
Please make sure that none of the computer resolution settings exceed
the maximum resolution of LCD monitors.
PS/2 mouse and keyboard ports ( 6-pin Mini-DIN), or at least one USB port.
Cables
For optimum signal integrity and to simply the layout, we strongly recommend that
you use the high quality specific custom cables sets described below:
LCD console Computer connected KVM Switch Computers connected
Function
Interface Length
LCD console to computer
( 3 – in -1 ) PS/2 1.8 m
KVM switch to computer
( 4 – in- 1 ) PS/2 & USB 1.8 m
3.0 m
5.0 m