Longshine LCS-KL-2716M - Manual (Page 28)

27
F3: Lock: setup lock/unlock, only available when F5 Security is enabled.
F4: Rename: rename selected channel name.
F5: Security: security function and user authority settings
F6: Lock Port: PC port lock function (for administrator only)
7.2 Channel selection in OSD
7.2.1 Channel select to computer
Use the and arrow keys to highlight a computer and then
to select it and leave OSD menu. A banner with the channel
name will be shown on left-upper corner of the screen.
┬ ────┬──────
│ └
Channel Name
└────────────
Channel Number
Channel Banner (Single Layer)
7.2.2 Channel select to cascade port
A plus mark (+) showing in the left of channel name indicates that the port
is under cascade channing. Pressing in this channel will enter
one level down, and the screen pops up the listing of the computers of the
slave KVM.
┬ ┬ ┬ ────┬──────
│ │ │ └
Channel Name
│ │ └─────── Channel Number
│ └────────── 2 nd Layer Channel Number
└────────────── 1 st Layer Channel Number
Channel Banner (Cascade Layer)
7.2.3 Return from cascade port
After entering cascade port, press will return to upper layer OSD
menu.
s
s
s
s