Longshine LCS-KL-2716M - Manual (Page 21)

20
Setup leading hot key to < Caps Lock >
< CTRL > →
→ → → < CTRL > → → → → < Caps Lock > → → → → < Enter >
Note: You can also change leading hot key by pressing in OSD main
menu. Please refer section 7.3.5 Setup in OSD – Hot Key.
6.1.3 Channel Select - Single KVM
Specific channel selection
You can select the connected computers by using the two-step Hot Key
sequence. Press key twice (Step 1), then press key (1 to
16) and (step 2) to select the computer you want to control.
Figure 12: Specific channel selection hot key
→ → <1> → or
→ → <2> → or
…
…
→ → <16> →
Note: You can also select computers in OSD menu. Move the indicator bar
to the chanel to switch by using , or
Down>, then press to select the connected computer.
Please refer section 7.2 Channel Selection in OSD.
Arrow Key Channel Shift Function
Press twice, and press or
key to shift left/right one channel.