Longshine LCS-KL-2716M - Manual (Page 20)

19
6. Operation
You can control computers via 8-Port or 16-Port Combo KVM Switch
by front push button, hotkeys and OSD.
1. Push button operation
Press the front panel push button to select the PC and operate it.
2. Hot Key operation
Please refer section 6. HotKey Operation.
3. OSD operation
Please refer section 7. OSD Operation.
6.1 Hot Key Operation
6.1.1 Call OSD Menu
Press < Scroll Lock> twice and , then the OSD “Main Menu” will be
displayed on the monitor screen. All of the KVM parameters can be setup in
OSD mode. You can also execute some KVM functions in OSD.
→
→ → → → → → →
6.1.2 Leading Hot Key Select
The two-steps hot key sequence is used for quick function execution.
The leading key is by default. However, you can change the
leading hot key if you want.
By pressing twice, , then press , you can
change the leading hot key.
The available leading hot key are , < Num Lock > or < Caps
Lock > for option.
Setup leading hot key to < Scroll Lock >
< CTRL > →
→ → → < CTRL > → → → → < Scroll Lock > → → → → < Enter >
Setup leading hot key to < Num Lock>
< CTRL > →
→ → → < CTRL > → → → → < Num Lock > → → → → < Enter >