Leitz Diamaster WhisperCut - Manual (Page 8)

Deuts
ch
English
中
文
Ita
liano
Fr
ançaise
Espa
ñol
Po
rt
uguê
s
Ру
сс
кий
8 04/2012 ID.524571 V2.0
MEC (mechanical feed)
Tools marked with “MEC“ shall only be used on machines with mechanical feed!
1.3.3 Working method
1.3.4 Material to be machined
Wood, wood-based material, as well as material with comparable cutting properties as per
catalogue details. Special applications only after release by the manufacturer.
1.4 Safe handling
1.4.1 Application
The tool is only allowed to be used as described in the section “Intended use”.
The valid national rules for accident prevention and safety at work regulations have to be
observed - especially the safety requirements according to EN 847.
1.4.2 Transport
Wear safety gloves!
Danger of injury by sharp cutting edges!
Transport only with suitable packaging.
Be very careful when packing / unpacking!
Danger of damage!
1.4.3 Mounting on the machine