Leitz Circular sawblades tipped - Manual (Page 11)

D
eu
ts
ch
En
gl
is
h
日日
本本
語語
中
文
Ita
lia
no
Fr
an
ça
is
Es
pa
ño
l
Po
rt
ug
uê
s
Ру
сс
ки
й
11 01/2013 ID.524661 V1.0
1.4 Safe handling
1.4.1 Application
The tool is only allowed to be used as described in the section “Intended use”.
The valid national rules for accident prevention and safety at work regulations have to be
observed - especially the safety requirements according to EN 847-1.
1.4.2 Transport
Wear safety gloves!
Danger of injury by sharp cutting edges!
Transport only with suitable packaging.
Be very careful when packing / unpacking!
Danger of damage!
1.4.3 Mounting on the machine
The tool has to be mounted, locked and started up on the machine as per the instructions
of the machine manufacturer.
Starting the machine during the tool change is not allowed (see handling instructions of
the machine).
Wear safety gloves!
Danger of injury by sharp cutting edges!
Pls. keep to the guidelines of the machine producer referring the maximal tool mass, the
tool diameter and the starting torque!
Check the machine data, especially RPM and direction of rotation!
Danger of loosening of the tool.
Cutting parts shall not come in contact with clamping elements or machine parts.