Installation – LABEC J-MPB2 User Manual
Page 8
[ Fig.2 : Magnetic water drain ]
[ Fig.3 : Main power switch ]
4. Installation.
4.1 Precautions for Installation
●
This equipment is designed and manufactured to operate properly only in use of rated
voltage. Refer to
specification section
of this manual for
rated voltage
before installation.
●
Use AC power cable that comes with (or installed to) the product.
●
Do not touch the Power Cord wet handed.
●
Avoid locations where the equipment is exposed to direct sunshine.
●
Do not place the equipment in a corrosive atmosphere.
●
Do not use the equipment in a flammable atmosphere.
●
Do not use the equipment where ventilation is poor.
●
Do not locate the equipment in a dusty location.
●
Do not use in an unstable place that are subject to vibrations.
●
Avoid locations of high humidity.
●
Avoid locations where the equipment is exposed to high temperature.
●
Recommended temperature range:
5ºC to 35ºC
●
Avoid locations of altitude higher than 2000m.
●
Use the equipment indoors only.
●
Secure adequate space around the power plug.