Safety precautions – LABEC J-MPB2 User Manual
Page 5
Safety Precautions
The following safety precautions must be observed and followed to avoid fire hazard, electrical
shock, accidents, and other failures. Keep them in mind and make sure that all the precautions
are observed and followed properly. LABORATORY EQUIPMENT PTY LTD assumes no liability
nor any responsibility against any damages, accidents, or problems resulting from negligence of
the precautions.
Users
●
Only qualified personnel who understand the contents of this Instruction
Manual must use this product.
●
If it is handled by unqualified personnel, personal injury may result.
Be sure to handle only under supervision of qualified personnel.
Purpose of use
●
If the product is to be used for purposes not described in this manual, contact
your LABORATORY EQUIPMENT PTY LTD agent in advance.
Input Power
●
Use the product with the specified input power voltage.
●
For applying power, use the AC power cable provided. The shape of the plug
differs according to the power voltage and areas. Use the cable which is
suitable for the line voltage used.
Fuse
●
With products with a fuse holder on the exterior surface, the fuse can be
replaced with a new one.
●
When replacing a fuse, use the one which has appropriate shape, ratings,
and specifications.
Cover
●
There are parts inside the product which may cause physical hazards. Do not
remove the external cover. If the cover must be removed, contact your
LABORATORY EQUIPMENT PTY LTD agent in advance.