LABEC J-MPB2 - Manual (Page 11)

: Shift Key : Used to move decimal point of setting value.
: Increase Value Key : Used to change setting value.
: Auto Tuning Status Display : Lamp blinks when automatic tuning is in process.
: Auto Tuning Key : AT key function is starts if you press AT key for more than 4 seconds.
: POWER ON / OFF Key
Displays current speed (R.P.M)
of shaker in operation.
[ Fig.5 : RPM display meter ]
Sets shaking speed (R.P.M.) by turing
the knob
[ Fig.6 : Shaking speed (R.P.M.) control dial knob ]
● Key switch function feature of Temperature controller.
■ Power ON/OFF Key (of Main Power Switch) : Turns Power ON / OFF.
■ MODE Key :
- Press MODE Key once in Normal Display Mode and changes to Temperature,
Time Setting Mode.
- Press MODE Key for over 6 seconds and changes to individual Parameter
Setting Mode.
- Press Mode key once again and the parameter changes to another parameter,
and pressing the MODE Key for more than 2 seconds ends Parameter Setting
Mode, and returns to Normal status.
■ Shift Key :
- Moves the decimal point of setting data in each MODE.
- Press Shift Key for over 6 seconds and changes to Factory Setting Mode.
■ Increase setting value Key : Increase set-value of each decimal point