LABEC J-MPB2 - Manual (Page 4)

Use of Instruction Manual
● Please read through and understand this Instruction Manual before operating the product.
After reading, always keep the manual nearby so that you may refer to it as needed.
When moving the product to another location, be sure to bring the manual as well.
● If you find any incorrectly arranged or missing pages in this manual, they will be replaced.
If the manual it gets lost or soiled, a new Instruction Manual can be purchased.
● This manual has been prepared with the utmost care; however, if you have any questions, or note
any errors or omissions, please contact us or your distributor or agent.
Reproduction and reprinting of this Instruction Manual, whole or partially, without our permission is prohibited.
Both unit specifications and manual contents are subject to change without notice.
SAFETY SYMBOLS
This Instruction Manual and this product use the following safety symbols.
Please keep in mind the meaning of each of the symbols to ensure safe use of the product and to
prevent any damages, accidents, or problems resulting from negligence of these safety symbols.
(As using symbols may depend on the product, not all of the symbols may be used.)
● Indicates the possibility of personal injury or death.
Never fail to follow the operating procedure.
● Do not proceed beyond a WARNING sign until the noted
conditions are fully met to satisfactory and understood.
● Indicates the existence of possibility of damage to the product
or to the operator in operation.
● Never fail to follow the operating procedure.
● Indicates the existence of possibility of damage to the product
or to the operator in operation when cautions are not observed
and followed properly.
● Indicates additional information such as general warning,
caution, risk of danger, and operating procedure.
● When this mark is indicated on the product, refer the relevant
section of the Instruction Manual.