LABEC Shinva-45N - Manual (Page 7)

5
u Safety valve of auto release against overpressure：It opens when the designated
pressure is surpassed.
u Circuit safety device: AC loop short protection.
Chapter 3 Installation
3.1 Installation Procedures
3.1.1 Placement of the Autoclave
Position the equipment on a level and firm surface in a room with good ventilation,
adjust the foot screws to make the equipment level. Allow at least 25cm ventilation space
on all sides of the equipment.
3.1.2 Water Preparation
Water quality:
u Conductivity less than 15µS/cm
u Bleacher content：≤2mg/l
u PH value is 5—7
u Hardness：≤0.02mmol/l
5 c m
25
cm
2 5 c m
2 5 c m
5 8 0
6 2 0
82
8
12
00