KGUARD Security SHA28 - Manual (Page 63)

ENGLISH
Chapter 5: KGuard Web Client
DVR User’s Manual
63
Item Description
Channel Select the channel that you want to configure.
Name Enter the desired channel name to be displayed on the screen.
Position Set the channel name location on the screen. Options are:
• U-L: Upper left
• D-L: Down left
• U-R: Upper right
• D-R : Down right
• Close: Select this option to hide the channel name.
Live Enable/Disable live view display of the channel.
Live Time Enable/Disable live view time display.
Record Time Enable/Disable record time display.
4
To save the settings, click Apply at the bottom of the screen.
« TIP »
• To apply the same settings to other channels (except the channel name), click Copy To at the bottom of the
screen. See “Copying Settings To Other Channels” below.
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications and retain the existing settings, click Refresh at the bottom of the screen.
Copying Settings To Other Channels
The settings of one channel can be copied to another or to all channels. To do this, perform the following:
1
After modifying the settings, click Copy To. The screen below appears.
2
Select the channels you want to copy the settings to. To copy to all channels, click All.
3
Click Apply to copy.