5 pre-tare function – KERN & SOHN MCB 300K100M User Manual
Page 37

12.5 PRE-TARE function
If the tare weight is known (rubber mat, clothing…..) . you may inter the value
manually.
0
0.0
Start balance by pressing
OFF
ON
Wait for the rest position display
.
000.0
Press
PRE-
TARE
briefly.
A flashing display appears.
A small arrow will be shown on the display under “PRE-TARE”
and under “NET” as long as the PRE-Tare function is enabled.
The most recently applied value or “000.0“ will appear.
Go to the numeric keypad and enter a new value.
Confirm value with
ENTER
-1.0
The entered value appears on the display with a minus in front.
67.0
Have the person sit or stand on the scales
The weight value reduced by the previously entered tare
value will be shown.
68.0
To return to normal weighing mode, again press the
PRE-
TARE
button.
MCB_MPT-BA-e-1418
37