KERN & SOHN MCB 300K100M - Manual (Page 24)

10.8 Attaching an optional stand
 Secure circular plate with
screws on the aluminium
section
 Secure wall fixing device
with screws at the top on
the aluminium section
 Remove the two lateral
rubber plugs from the
display unit.
 Secure the display unit with
the two rotary knobs to the
fixing device.
 Position display unit with
the rotary knobs.
 Secure cable with cable
clips
10.9 Battery operation
On models where the back of the display unit is not directly accessible, remove the
two black rotary knobs from both sides of the display unit in order to open the battery
compartment and remove the display unit from the holder.
 Remove the battery cover
[2] from the underside of the
scales
 Take out the battery holder
 Insert 6 batteries (1.5 V AA)
24 MCB_MPT-BA-e-1418