KERN & SOHN MBB 15K2DM - Manual (Page 23)

MBB-M-BA-e-1314 23
 The balance is able to only store one taring value.
 When the balance is unloaded the saved taring value is
displayed with negative sign.
 To delete the stored tare value, release scales and press
TARE
.
11.3 Hold function (Standstill function)
The balance has an integrated standstill function (mean value calculation). This
allows correct weighing determination of a baby although the latter is not keeping still
on the scales.
0
 Start balance by pressing OFF
ON
Wait for the rest position display .

 Put baby in the centre of the weighing pan.
 Press
HOLD
A triangle starts to flash in the display, during this time the
balance will record several measuring values and will then
display the calculated average value.
 By pressing the
HOLD
button several times, the balance
returns to the normal weighing mode.
 Press the
HOLD
button once more to repeat this function as
often as required.
There is no average value calculation in the event of too much
movement.