KERN & SOHN MBB 15K2DM - Manual (Page 17)

MBB-M-BA-e-1314 17
9.6 Stand assembly (optional)
 Use the 4 screws to attach
the stand to the bottom of
the scale.
 Remove the two lateral
rubber plugs from the
display unit.
 Secure the display unit with
the two black rotary knobs
to the fixing device.
 Position display unit with the
rotary knobs.
9.7 Battery operation
On models where the back of the display unit is not directly accessible, remove the
two black rotary knobs from both sides of the display unit in order to open the battery
compartment and remove the display unit from the holder. Remove battery cover
from under the display unit. Insert 6 x 1.5V AA batteries into the holder. Replace
battery cover and screw the display unit back into the holder using the black rotary
knobs.
In order to save the battery, the balance switches automatically off after 3 minutes
without weighing. Further shutdown times can be set in the Menu (Function "A.OFF"),
see Section 10.
If the batteries are run down, "LO" appears in the display. To turn
off scales, press the OFF
ON
button and immediately change the
batteries.
If the balance is not used for a longer time, take out the batteries
and store them separately. Leaking battery liquid could damage
the balance.