KERN & SOHN KDE-T - Manual (Page 45)

45 KDE-T-BA_IA-e-1210

(example)
“rESOLE”will appear briefly followed by a numeric value.

Now set readability. You can select between default values
that are dependent on the max load of the weighing scale.

Press to change between values.

Press to confirm the required value.
Here is an example:
0.001 kg
- 0.002 kg - 0.005 kg
– 0.010 kg – 0.020 kg –
0.050 kg

“F” will appear briefly before the weighing scale changes to
adjusting mode and “CAL” will be displayed.

Linearize weighing scale (See chap.6.7.1)
Dual range balance:
Weighing scale is turned off

(example)

Press and hold;

Keep holding pressed down and also hold down
at the same time until software version “P1.0x” is
displayed. Release both keys.


“SCL.TYP”will appear briefly followed by “1.rAnGE“.
 Setting single range (“1.rAnGE“) – or dual range
(“2.rAnGE“) weighing scale

Press to change between “1.rAnGE”and “2.rAnGE”.
Select „2.rAnGE“ and confirm by
.