KERN & SOHN KDE-T - Manual (Page 44)

KDE-T-BA_IA-e-1210 44
12.5 Service menu
Configure display unit:
Single-range balance:
Weighing scale is turned off

(example)

Press and hold;

Keep holding pressed down and also hold down
at the same time until software version “P1.0x” is
displayed. Release both keys.


“SCL.TYP”will appear briefly followed by “1.rAnGE“.
 Setting single range (“1.rAnGE“) – or dual range
(“2.rAnGE“) weighing scale

Press
to change between “1.rAnGE”and “2.rAnGE”.
Select „1.rAnGE“ and confirm by .
„bASUnt“ is displayed. This is where you can set the required
weighing unit.

Press to change between the individual units and
press to select the required unit (ex. here:
„kg“).

(example)
(example)
“SCL.CAP” will appear briefly.

Setting weighing scale capacity
A numeric value appears and the digit on the right is
flashing.

Press to increase the numeric value or to
decrease. Press to change to a different decimal
place. Set weighing scale capacity (here is an example of
50 kg) and press to confirm.