KERN & SOHN KDE-T - Manual (Page 10)

KDE-T-BA_IA-e-1210 10
6.3 Unpacking/installation
Carefully remove the display unit from packaging, remove plastic cover and place it
in the designated work area.
Mount the display unit in a way that facilitates operation and where it is easy to see.
6.4 Mains connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.
6.5 Operation using a rechargeable battery (optional)
Lift-off the battery cover on the lower side of the balance. Connect 9 V compound
battery. Replace the battery compartment cover.
For battery operation the balance has an automatic switch-off function which can be
activated or deactivated in the menu.

Keep pressed
in the weighing mode until “Unit” is displayed.

Press repeatedly until "AF" appears.

Acknowledge with .

Use now to select between the following two settings:
„AF on“: In order to save the battery, the balance switches automatically
off after 3 minutes without weighing.
„AF off“:
Switch-off function deactivated.

Acknowledge selection by . The balance returns to weighing mode.