KERN & SOHN HFC 10T-3 - Manual (Page 31)

5.11 Totalization
With this function the individual weighing values are totalized into the sum memory
by pressing .
Start adding-up procedure:

Hook-on the item to be weighed A.
Wait until the stability display “ STABLE ” appears, then press .
„n001“ followed by the weight value will be displayed. The weighing value is
added into the summation memory.

Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.

Suspend the item to be weighed B.
Wait until the stability display appears, then press . The weighing value is
added into the summation memory. The number of added-up items “n002“,
followed by the total weight will be displayed for approx. 3 sec. After that the
current weighing value is displayed.
Add more weighed goods as described before.
Please note that the crane scales must be unloaded between the individual weighing
procedures.
This process may be repeated 99 times or till such time as the capacity of the
balance has been exhausted.
HFC-BA-e-1511 31