KERN & SOHN HFC 10T-3 - Manual (Page 26)

5.5 Taring

Attach initial load.
Press , zero display appears. The weight of the container is now internally
saved.

Weigh the material, the net weight will be indicated.

After removing the preload weight appears as negative display.

To delete the tare value, remove load from suspended balance and press .
5.6 Weighing

Load the suspended balance.
The weight value will be displayed at once.
Overload warning
Overloading exceeding the stated maximum load (max) of the balance, minus a possibly
existing tare load, must be strictly avoided. This could cause damage to the balance.
Exceeding the maximum load is indicated by the display „ol“ . Unload balance or reduce
preload.
26 HFC-BA-e-1511