KERN & SOHN HFC 10T-3 - Manual (Page 25)

5.3 Turn on/off
Start-up
 Press on the display unit; the unit will carry out a self-test. As soon as the
weight display appears, the instrument will be ready to weigh.
 Press , too, on suspended balance.

If „Err 10“ appears in the weight display no radio
communication with the balance could be established. Either
the suspended balance is not yet switched on or the
rechargeable battery has not been sufficiently loaded.

Use to turn on suspended balance or to load battery.

„Err 10“ disappears and the zero display will appear. The
balance is now in weighing mode and ready for operation.
Switching Off
 Press at the display unit, the display disappears.
5.4 Set balance to zero
In order to obtain optimal weighing results, reset to zero the balance before weighing.
Manual:

Unload the balance

Press , zero display as well as indicator ZERO will appear.
Resetting to zero is only possible when the displayed weight value is within the
default zero setting range (See chap 6 “P1 ref
0rAnG“) and the balance is not
moving, that is, the stability display “STABLE“ must be displayed.
Automatic:
Automatic zero tracking can be turned off in menu (See chap. 6 /
function “P1 ref
0AUto“ ) or the range for zero tracking can be modified.
When this function is enabled, the zero point will be corrected automatically provided
there is no load on the balance.
HFC-BA-e-1511 25