KERN & SOHN HFA 10T-3 - Manual (Page 27)

5.8 Hold weighing value (Data-HOLD function)
Once a stable weight value has been established, this can be fixed until deleted
before the next weighing activity.

Attach the material to be weighed

To start the Hold function, press and the heaviest load of the last weighing
activity will be displayed.
The indicator
 above HOLD appears.

The weighing value will be held in the display until it is deleted by .
5.9 Peak value function (peak function)
Attention:
Never exceed the maximum permitted load of the peak value on the
balance (!!Danger of breaking!!).

To start the peak value function, press and hold during zero display.

Lift load and the heaviest load of the weighing activity will be displayed.
The indicator
 above PEAK will appear.

The peak load will be held on the display until deleted by pressing . For that,
press for about 2-3 seconds. The
 above PEAK disappears.
HFA-BA-e-1511 27