KERN & SOHN VFS 2T1 - Manual (Page 23)

7.2 Weighing
Ö Press downwards the hand lever of the lifting device, the weighing system is
lowered.
Ö Switch-on by , after a concluded self-test the system changes to zero display
„0.0“
Ö If „0.0“ is not displayed, press
Ö Place the loading fork under the pallet in a way that the pallet is in the centre of the
loading fork.
Ö Move upwards the loading fork with help of the lifting device until the load has
completely detached from the floor
If the stability display „STABLE“ lights up, the gross weight will be displayed.
Printout example (see chap. 8 Printer):
Date 2011/06/09 Date
Time 17:34:27 Time
18.30 kg Weight
7.2.1 Gross - net weighing
After the load was lifted, e.g. on a pallet, the display shows the gross value of the
weighed weight.
7.2.2 Net weighing
This function may only be carried out, after the system having been
tared. “NET“ will be displayed
Use the button to switch over between the display of the net weight and the
display of the gross weight.
7.3 Weighing units switch-over
Press the UNIT button to set the different weighing units.
These must be activated in menu (chap. 9.2) before.
VFS-BA-e-1111 23