KERN & SOHN VFS 2T1 - Manual (Page 13)

Non-optimal positioning of load Optimal positioning of load
Load
Pallet
• Temperature range: The maximum deviation for 0.1% of the weighed load is
between -10 and +40°C. Outside this temperature range deviations of up to 0.3%
may occur.
• Avoid jarring during weighing
• Protect the weighing system against high humidity, vapours and dust
• Do not expose the device to extreme dampness for longer periods of time. Non-
permitted condensation (condensation of air humidity on the appliance) may occur
if a cold appliance is taken to a considerably warmer environment. In this case,
acclimatize the disconnected appliance for ca. 2 hours at room temperature.
• Major display deviations (incorrect weighing results) may be experienced should
electromagnetic fields (e.g. due to mobile phones or radio equipment), static
electricity accumulations or instable power supply occur. Change location or
remove source of interference.
VFS-BA-e-1111 13