KERN & SOHN GAB 30K5DNM - Manual (Page 30)

30 GAB-N-BA-e-1315
10.7 Automatic adding-up
This function is used to automatically add individual weighing values to the
summation memory and to receive a printout from a possibly connected optional
printer.
For details on how to set this function see chap. 11 menu: „ACC on“)
 Place load A
After stabilisation control has taken place, you will hear an
audio sound.
The weighing value will be saved to the summation memory.

(Example)

 Remove load A
ACC 1, followed by the weighing value will be displayed and
possibly printed.
Afterwards the weighing scales change to zero display.
 Place goods to be weighed B.
After the standstill control sounds a signal tone.
The weighing value is added into the total adding memory.

(Example)

GROSS
ZERO
 Remove load B
 ACC 2, followed by the total weight will be displayed and
possibly printed.
Afterwards the weighing scales change to zero display.
 Add more weighed goods as described before.
Please note that the balance must be unloaded between the
individual weighing procedures.
 You can repeat this process until the capacity of the scales is
exhausted.