5 host computer wiring connections, Proximity elevator control panel – Keri Systems LC-508 Proximity Elevator Control User Manual
Page 22
Proximity Elevator Control Panel
2305 Bering Drive
01941-001 Rev. B
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 22 of 22
Quick S
tart Guide
LC-502P/LC-508P
5.5
Host Computer Wiring Connections
The wiring connections between the Host Computer and the access control/elevator control network
are thoroughly described in the PXL-500/PXL-510 Quick Start Guide (P/N 01918-001). Please
refer to these documents for information regarding host computer/network connections.
6.0
Elevator Reader Responses to Access Control Events
During day-to-day activity, the reader in the elevator car will respond to access control events in a
specific manner. Refer to Table 9 for a summary of the Reader’s LED and beeper actions during
access control events.
Table 9: Reader Responses to Access Control Events
Event
LED Status
Beeper Status
waiting for card presentation
displays a steady Amber LED
silent
upon card presentation
flashes a Green LED
one short beep