Keri Systems LC-508 Proximity Elevator Control - Manual (Page 21)

Proximity Elevator Control Panel
2305 Bering Drive 01941-001 Rev. B
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 21 of 22
LC-502P/LC-508P
Quick S
tart Guide
3. Daisy-chain the TxRx+, TxRx-, and Shield Network Communication connections from the
terminal strip on the first panel to the terminal strip on the second panel. Make the connections
per the information in Table 8 and Figure 14.
Figure 14: LC-508P to LC-508P Nework Communication Wiring
4. The floor/relay connections for the second LC-508P are made according to the floor/panel
association. Refer to Section 5.3 on page 15 for all floor/relay connections to the LC-508P.
Power connections are made per the instructions in Section 5.2.4 on page 15.
Table 8: LC-508P to LC-508P Nework Communication
Wiring
TB-B on First LC-508P TB-C on Second LC-508P
TxRx- TxRx-
TxRx+ TxRx+
Shield Shield