HP C240 User Manual
Page 215
197
The Boot Console Interface
Displaying the Current Memory Configuration
Memory Information Sample 2
The following sample shows the memory information when memory mod-
ules are not properly installed and configured. In this sample the memory
module in memory slot 1A is missing.
MEMORY INFORMATION
WARNING: Memory has been reconfigured due to a physical change or because the
Page Deallocation Table (PDT) was cleared. This is for information
only. No action is required.
MEMORY STATUS TABLE
Slot Size(a+b) Status
---- --------- ------
0a/b 64MB Configured
1a/b ??MB SIMM not seated properly.
2a/b 128MB Configured
---------
TOTAL 192MB
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot
--- ----- --- ---------- ---- ----------- ---- ----
0x00000000 0 0 Configured 1 Configured 64MB 2a/b
0 Configured 3 Configured 64MB 0a/b
1 Configured 1 Configured 64MB 2a/b
Group 0 interleaved 2 ways over 3 banks
BAD MEMORY TABLE
SMC SMC Status Bank Bank Status SIMM Size Slot
--- ---------- ---- ----------- --------- ----
0 Present 0 Not Present 0MB 5a/b
2 Not Present 0MB 4a/b
1 Present 0 Not Present 0MB 5a/b
2 Not Present 0MB 4a/b
3 Not Present 0MB 0a/b
2 Present 0 Sizing Error 0MB 1a/b
1 Not Present 0MB 3a/b
2 Sizing Error 0MB 1a/b
3 Not Present 0MB 3a/b
Active, installed memory (bytes) : 201326592 of Standard DRAM
Deallocated pages (bytes) - 0
-----------
Available Memory (bytes) : 201326592
Good Memory Required by OS (bytes): 0 (Not Set by OS)
Memory
HVERSION SVERSION
-------- ----------
0x0710 0x0900