HP C240 User Manual
Page 159
141
Changing Your Workstation’s Hardware Configuration
Installing an EISA, PCI, or GSC Option Board
Installing the Option Board
Follow these steps to install a GSC, EISA, or PCI board into your worksta-
tion:
1
Remove the main tray assembly as described in “Removing the Main Tray As-
sembly” earlier in this appendix.
2
Press the fan release clip and rotate the fan, as shown in Figure 50.
Figure 50
Rotating the Fan
3
Remove the screw from the EISA retainer, and remove the EISA retainer, as
shown in Figure 51.
Figure 51
Removing the EISA Retainer
EISA Retainer