Antenna, Push the round end of the, C/vliu; inrin/convkrtkr – Philips PPC136C User Manual
Page 6: If you have a cable converter box, Hookinc u, Tv a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
mi
HooKiNC U
p
Y
our
TV
A
ntenna
:
gin
)-
O
utdook
/I
ndoor
A
combination (outdoor
or indoor) antenna
receives normal broadcast
channels 2-13 (VHF) and
14-69 (UHF). Your con
nection to such an antenna
is easy since there is only
one antenna plug (75Q.
ANT ¡CABLE) on the hack
of your TV - and that’s
where the antenna goes.
your antenna has a
round cable (75 ohm) on the
end, then you're ready to con
nect it to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75
ohm adapter.
Push the round end of the
adapter (or antenna) onto the
75Q ANT/CABLE plug on the
rear of the TV. If the round end
of the antenna wire is threaded,
screw it down tight.
---------------------------------- 1^
Note: Rear view of the model
TV is shown with an optional
ProKit 1 type module installed
for RF Input plug connections.
Combination VHF/UHF Antenna
(Outdoor or Indoor)
Round Cable
75Q
Back of TV
2]
C
able
TV
C/Vliu; iNRin/CONVKRTKR
y
our Cable TV signal
may be a single (75
ohm) cable or a Cable
Converter Box installation.
In either case, the connec
tion to the TV is easy.
Remember, g
set the TV for the
type signal you've
connected (see page
9)^___________
Note: For homes
with separate UHF
and VHF antennas,
you will need an
optional combiner
to connect to the
TV. To order any
optional accessory,
contact your dealer
or call the toll-free
accessory ordering
number (1-800-851-
8885).
r
nal is a single round cable (75
ohm), you're ready to connect
to the TV. Go to step 2.
If you have a Cable
Converter Box: Connect the
Cable TV signal to the IN plug
on the Cable Converter Box.
Connect the Cable TV signal to
the 75G ANT/CABLE plug on the TV.
If you have a Cable Converter Box:
Use a round cable (75Q) to connect the
OUT plug on the Cable Converter Box
to the 75Q ANT/CABLE plug on the
TV.
m
VCR
TO
TV
zGINL
IU.
sk
; C
onnkction
nrfie basic Antenna, or
J. Cable, to VCR to TV
connection is shown to the
right. For more informa
tion on hookups with
Cable Converter Boxes,
refer to your VCR and
Cable Converter Box
Owner's Manuals.
^^^^Connect your
Antenna or Cable TV signal
to the IN FROM ANT(enna)
plug on the VCR.
Outdoor VHF/UHF
Antenna
Connect the OUT TO TV plug
on the VCR to the 75Q ANT/CABLE
plug on the TV (connecting cable sup
plied with the VCR).
Back of TV