Canon CHDK User Manual

Page 35

Filespace

< OSD parameters < Main Menu

Show Filespace Icon

Enable [•] / Disable [ ]

Displays a small SD card shaped icon on the screen to show how much filespace is left on the
SD card. Opaque means remaining free space. Transparent means that space has been used. Use
the OSD Layout Editor to position the icon anywhere on the screen.

Show Space Bar

[ Donʼt, Horizon, Vertical ]

< Filespace < OSD parameters

Displays a thin SD capacity remaining "fuel-gauge" icon on the screen. Location is
position-able in the OSD Layout Editor.

• Don't - Turn off this feature.
• Horizon - Displays the bar-graph gauge in a horizontal orientation.
• Vertical - Displays the bar-graph gauge in a vertical orientation.
• Size on Screen

Changes the display size of the "Space Bar" SD-capacity gauge.
1 /4 - the bar-graph only goes 1/4th the width or height of the EVF/LCD display.
1 /2 - the bar-graph goes 1/2 the width or height of the EVF/LCD display.
1 - the bar-graph goes the full width or height of the EVF/LCD display.

• Width/Height

Change the width (for vertical space-bar) or height (for horizontal space-bar) in 1-pixel
increments.

Show Filespace in Percent

Enable [•] / Disable [ ]

Displays the SD card space remaining in a percentage of its total capacity. (Toggles between this
and the MB option.) OSD display element positionable in the OSD Layout Editor.

Filespace in MB

Enable [•] / Disable [ ]

Displays the SD-card space remaining in Megabytes. Toggles between this and the percentage
option. (see above).

Warning Unit

< Filespace < OSD parameters

Don't - Don't display a warning when the free SD-card space is getting low.

Percent - Change the space remaining display to the warning color when the percentage
reaches or goes below your selected "% Threshold" (see below).

MB - Change the space remaining display to the warning color when the Megabytes reaches
or goes below your selected "MB Threshold (see below).

• % Threshold

< Filespace < OSD parameters

Setting used in conjunction with above "Warning Unit" feature. Set the amount of SD-card
space percentage remaining when you want that OSD element to turn to your chosen warning
color.