Clipcomm CWP-100 User Manual
Page 33
32
Condition
Unconditional : The CWP-100 immediately forwards all the
incoming calls to the previously assigned phone number.
Busy : The CWP-100 forwards the incoming call when the
channel is in use.
No Answer: The CWP-100 forwards the incoming calls to the
previously assigned phone number when the CWP-100 user
does not answer the phone for 30 seconds.
Call Forwarding
Number
Set the phone number to forward the incoming call.
N/A
9.3.4. Outgoing Call Processing Configuration
The CWP-100 provides the services as below for outgoing calls.
9.3.4.1. Dial Plan
The CWP-100 edits the outgoing phone number according to the rules that the user assigns. The user can
set up to 20 entries for dial plan.
Parameter
Description
Number
The pattern that the user input while dialing. The user can use the digit and
characters below to find the pattern.
0 ~ 9 number : General phone number.
? : any single digit.
~ : any numbers of digits.
LEN
The outgoing call will operate immediately without termination digit if the
pattern that the user input is identical to the ones saved on Number, and the
length of them is identical to the one saved on LEN.
TRNC
Eliminate the phone numbers at the front as the saved value on TRNC if the
pattern that the user input is identical to the ones saved on Number.
Prefix
Add the phone numbers at the front as the saved value on Prefix if the pattern
that the user input is identical to the ones saved on Number.
Postfix
Add the phone numbers at the end as the saved value on Postfix if the pattern
that the user input is identical to the ones saved on Number.
Block
Reject the outgoing call phone if the pattern that the user input is identical to
the ones saved on Number.
Dest. Address
Attempt the outgoing call to the assigned IP address as the destination line if
the pattern that the user input is identical to the ones saved on Number.