Clipcomm CWP-100 User Manual
Page 13
12
Follow the steps as MENU “3: System Setting” ”1: Network Setting” to check the current setting.
1: Current Setting
2: Static IP
3: DHCP
4: ADSL
5: Restart
6.2.1. Current Setting
①
Follow the steps as MENU “3: System Setting” ”1: Network Setting” “1: Current Setting” to view
the current settings. You can check current network mode and network parameters.
1: Current Mode
DHCP
2: IP address
192.168.0.223
3: G/W Address
192.168.0.1
4: DNS Address
168.126.63.1
5: Netmask
255.255.255.0
6: Enet Address
000788100AE1
6.2.2. Static IP Setting
①
Follow the steps as MENU “3: System Setting” ”1: Network Setting” “2: Static IP”.
1: IP
2: G/W
3: DNS
4: Netmask
5: Restart
②
Select “1: IP” from the menu. Input the IP address and then press ENTER button. To express “.”
between the numbers, press the # key.
IP address
211.12.23.34_
MODE:
A
③
In the same way, input the gateway address, DNS address and Netmask address in order.