Clipcomm CWP-100 User Manual
Page 18
17
external IP address.
NAT Router IP
211.211.211.211
MODE:
A
6.3.4.3. NAT Session Timer
When using the NAT traversal function, you need to set the session time for transmitting the packet
periodically so that the CWP-100 maintains the NAT router and the NAT session. Follow the steps as
MENU “4: NAT Traversal” “4: NAT Timer” and then input appropriate time.
NAT Timer[sec]
30
MODE:
A
You may use the embedded web page and configure more parameters for VoIP settings. Please
refer to Chapter 9 ”Web Configuration” for details.