Clipcomm CWP-100 - Manual (Page 10)

9
5. Installation Overview
Please check the parts of the CWP-100 and then follow the steps bellow to instal CWP-100 properly.
Caution: Use only the power adaptor, charger and battery supplied by the provider. Using other
power adaptor, charger and battery may cause the CWP-100 to deteriorate the voice quality and
malfunction.
5.1. CWP-100 Installation
① Set the CWP-100 on the charger. (Figure “A”)
② Plug the power adaptor (5V) to the charger. (Figure “B”)
③ Connect the headset to the CWP-100 in order to use the wired headset. (Figure “C”)
④ Press END button for a few seconds to start CWP-100.
5. Installation Overview