Canon CX-1 - Manual (Page 31)

5. Basic Photography
-19-
12 Review the image.
The fundus images and study information are displayed in the control software. Check the images.
To take images of the other eye, repeat steps 7 and the following.
13 End the study.
End the study with the control software.
14 Lock the stage unit.
Press the stage unit lock button to lock the stage unit.
Concerning the adjustment of the flash intensity (for color, red free, cobalt photography
mode, and fluorescein angiography mode)
The flash intensity is already set to the standard level for each photography mode.
To adjust the intensity, press the flash intensity switches.
Each time one of these switches is pressed, the intensity is increased or reduced by steps of 0.3.
The flash intensity selected is shown by the lighted area of the flash intensity indicator.
Note: For details on the flash intensity adjustment in the fundus autofluorescence mode,
refer to Concerning the adjustment of the flash intensity (for fundus
autofluorescence mode) (page 23).
Increased by 87% (equivalent to a step of 0.9)
of the standard
Standard
Increased by 52% (equivalent to a step of 0.6)
of the standard
Increased by 23% (equivalent to a step of 0.3)
of the standard
Reduced by 19% (equivalent to a step of 0.3)
of the standard
Reduced by 34% (equivalent to a step of 0.6)
of the standard
Reduced by 47% (equivalent to a step of 0.9)
of the standard
Reduced by 56% (equivalent to a step of 1.2)
of the standard
Reduced by 65% (equivalent to a step of 1.5)
of the standard