Attach the hoist cables to the center eye bolts, Attach the stablizing cables to the hoist cable – Jaypro Sports BBC-UBKIT User Manual

Page 20

20 of 24

 Check that all burrs have been removed from the inside of the BBC-EL and BBC-T

prior to assembly. These fitting should move freely on their pipes.

ATTACH THE ANCHORING EYE BOLTS TO THE FRAME AND SECURE

1. There are 21 connection points on the cage
2. Each connection point is a 3/8” x 5” EYE Bolt with washers and a Nylon lock nut.
3. Note that you will be required to drill through the T fitting at the end hoist cable locations.

ATTACH THE HOIST CABLES TO THE CENTER EYE BOLTS.

ATTACH THE STABILIZING CABLES TO THE OUTER EYEBOLTS

1. VERIFY A CONSISTANT LENGTH OF THE STABILIZER CABLES
2. TAPE OFF THE ENDS OF THE CABLE

ATTACH THE STABLIZING CABLES TO THE HOIST CABLE

Clamp the two cables together at aprox 24” up the main hoist cable.

This manual is related to the following products:

BBC-UP5KIT BBC-KIT58 BBC-700B BBC-700M