Jaypro Sports BBC-UBKIT - Manual (Page 13)

© 2010 Jaypro Sports Equipment BBC-700B-M 02-08-2012
13 of 24
FIGURE 5 - SECTION B-B
INSTALL THE FIRST SEGMENT OF DRIVE PIPE
1. Insert the Swaged end of one section of drive pipe into the winch drum and push
towards the first DCP-A.
 Pipe may be inserted opposite direction if clearance is an issue.
2. Continue to insert the drive pipe segment through the DPC-A and continue the edge
of the pipe to end 27-3/4” beyond the center of the DPC-A.
3. Temporarily secure the drive pipe section to the winch with Duct Tape to prevent it
moving unexpectedly.