Philips FW-C100 - Manual (Page 26)

n
RECORDING
Notes:
- For recording, use only tape of EC type
I (normal tape).
- The tape is secured at both ends with
leader tape.At the beginning and end
of tape, nothing will be recorded for six
to seven seconds.
- The recording level Is set automatically,
regardless of the position of Volume,
DBB or DSC.
- To prevent accidental recording break
out the tab on the left shoulder of the
tape side you want to protect.
One Touch Recording
• For OneTouch Recording, as soon as
you press RECORD, the current
source (CD,TUNER or AUX) will be
recorded on tape deck 1.
1 Load a blank tape in tape deck 1.
2 Press RECORD on tape deck 1 to
start recording.
The REC starts flashing.
3 Press PAUSE to interrupt
recording.
4 Press STOP*OPEN on tape deck 1
to stop recording.
CD Synchro Start
Recording
During CD synchro start recording,
• Do not fast forward/rewind your
tape in tape deck 2.
1 Load a blank tape into tape deck 1
and a disc into the disc tray.
2 Press CD.
• You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If you do
not, the tracks are recorded
according to the order on the
selected disc.
3 Press RECORD on tape deck 1 to
start recording.
The REC starts flashing.
4 Press STOP»OPEN on tape deck 1
to stop recording, then press ■ to
stop disc playback
pg01-28/C100/37-EnN 12/6/00, 2:07 PM 3139 115 20881 (ENG)