Philips FW-C100 - Manual (Page 24)

u
TAPE
►► STOP-OPEN
Loading a tape
1 Press STOP*OPEN.
2 The tape deck door opens.
3 Load the tape with the open side
downward and the full spool to the
left.
4 Close the tape deck door
Tape Playback
1 Press TAPE to select TAPE mode.
"inPE" will be displayed.
2 Load the tape into the selected tape
deck
3 Press PLAY ► to start playback
• To interrupt playback press PAUSE.
• To resume playback press PAUSE
again.
4 Press STOP»OPEN to end
playback
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward a
tape by pressing or ►► ,
respectively.
-*■ The tape will stop automatically at
the end of rewinding or fast
forwarding.
2 Press STOP'OPEN to stop
rewinding or fast fowarding.
Continuous Playback From
Tape Deck 2 to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY ► on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY ► on tape deck 1.
Playback will begin with tape deck
2 and will continue with tape deck
1 when playback on tape deck 2
ends.
6 Press STOP»OPEN if you want to
stop playback before the end of the
tape in tape deck 1 or tape deck 2.
Notes:
- During rewinding or fast forwarding of a
tape, it is also possible to listen to
another source (e.g. CD, TUNER or
AUX).
pg 01-28/C100/37-EnN 12/6/00, 2:07 PM 3139 115 20881 (ENG)