Philips MAS-300 - Manual (Page 6)

IMPORTANT SAFETY INSTRUCTIONS
h
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all Instructions.
5. Do not use this apparatus near
¥«ter.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings, install in accordance with
the manufacturer's instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat
9. Do not defeat the
safety purpose of the
polarized or
grounding-type plug.
A polarized plug has two blades with one
wider than the other A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are
provided for your safety If the provided plug
does not fit into your outlet consult an
electrician for replacement of the obsolete
outlet
10. Protect the power cord fhom being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments/accessories
specified by the manufacturen
ACFblarized
Hug
Use only with the cart, stand,
tripod, bracket or table specified
by the manufacturer or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-oven
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
M* Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
IS.Battery usage
CAUTION
-To
prevent battery leakage which may result in
bodily injury, property damage, or damage
to the unit
• Install all batteries correctly, + and - as
marked on the unit
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries when the unit is not used
for a long time.
EL4475-E00-4.02/8
Class II equipment symbol
This symbol indicates that the unit has
a double insulation system
□