Philips MAS-300 - Manual (Page 18)

CD Operation
Notes:
- During program ploy or shuffling mode, it is not
possible to repeat ploybock for the current disc
(Repeat Disc mode).
- Pressing the CD OPEN/CLOSE button will cancel
all repeat and shuffling modes.
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order
1
Load the desired discs on the disc tray (refer to
“Loading discs”).
2
Press PROGRAM to start programming.
^ moo starts flashing
3
Press CD 1/2/3 to select a disc.
4 Press M or W repeatedly to select the desired
track.
5
Press PROGRAM to store the track
• Repeat step» 3-S to store other discs and
tracks.
6 To end programming, press ■ once.
-> PROG stays and the program mode remains
active.
•* The total number of tracks programmed and
the total playing time are displayed.
7
To start program play, press
► 11
.
^ "PLOy PfiQGRRfI* is displayed.
Notes:
- If the total playing time is more than "33:53"
or if one of the programmed tracks has a number
greater than 30, then Is displayed
instead of the total playing time.
- If you attempt to program more than 40 tracks,
■PROGRRM rULL’Is deployed.
- During programming. If no button is pressed
within 20 seconds, the system will exit the Program
mode automatically.
To review the program
• Stop playback and press M or M repeatedly.
• To exit review mode, press ■.
Erasing the program
• Press ■ once\vhen playback is stopped or
twice during playback.
PROG disappears and "PROGPRM CLERPEU"
is displayed.
Note
- The progmm will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
For Recording, please refir to ‘Tape
OperationIRecording".
18