Philips CDC771V - Manual (Page 9)

PLAYBACK (PLAY^)
INSERTING THE CDs JC
.2
O)
c
lU
NOTES! On CD-I discs, the changer activate only'
PLAY" In following explanation.
Press POWER1 to switch the changer on
NORMAL PLAYBACK" and “SEARCHING FOR A PASSAGE DURING
The changer vi/ill now' start CD detection to check how many CDs there are in the CD compartment. The turntable will
rotate slowly until all positions (1-5) in the CD compartment have been checked.
The position which is being checked is always shown on the display III5C x.
After CD detection the 1-5 CD number indicator will show the number of CDs in the CD compartment.
Open the CD compartment by pressing OPEN/CLOSE 19.
OPEN lights up.
Insert an audio CD, or Video CD or CD-G, printed side up, use the LOAD button 21 to rotate the turntable in the CD
compartment.
• Close the compartment by pressing OPEN/CLOSE 19.
- CLOSE lights up. The changer will start CD detection again.
NOTES!
- CD detection may never be interrupted. If, during detection, you press any button, then the changer will stop detection
and the display will give an incorrect indication of the number of CDs in the CD compartment.
- Always remove all CDs from the CD compartment if you want to transport the changer.
When the Video CD disc with PBC operation is played the
operation of the "Menu Play" & "Still Picture" can be pleasure.
The "Menu Play" is the interactive operation displaying the
information on the Monitor Screen.
Playing a Video CD with PBC:________________________
Following are operations for Video CD with PBC disc. The
player detects PBC disc, then change to "MENU play"
automatically. If you wish normal (continuous) play with PBC
disc, press PBC, KARAOKE, STANDBY, DISC, to cancel the
PBC mode.
To resume playback with PBC, press PBC key of the remote
control.
- Turn on the TV and select the video input. Insert a Video
CD with PBC disc, printed side up.
- The display shows the number of the current CD.
• Press PLAY ► 9 to start Video CD play and the menu
screen appears on the TV screen.
• Select the desired item in the menu screen with DSC •
MENU+3C and MENU-3b then press SELECT 9 or with
numeric keys of the remote control.
Adjust the volume on the TV.
NOTE!
Menu structure depends on Video CD software. Refer to the
instructions supplied with the disc.
The other menu control;
• You can see the next page of the menu by pressing NEXT
16.
• You can see the preceding page of the menu by pressing
PREV16.
• You can go back to the preceding menu by pressing
RETURN 3d shortly or by pressing < 5 « RETURN 13 on the
remote control.
SEARCHING FOR PARTICULAR SCENE (SCENE) * •
The scene number are encoded on Video CD with PBC disc,
you can check the scene number by using OSD full informa­
tion mode.
If you remember the number of particular scene, you can play
the Video CD start with the scene, (scene search)
• Press SCENE 7 on the remote control before or during
playback.
• Then enter the scene number by using 0-9 digit keys 10 of
the remote control.
• Press ► PLAY 15 of the remote control, play starts from the
entered scene.
NOTES!
- On some discs, prohibited to start with specific scene. In
this case the changer refuses the entering scene number.
- When there is no change in the display state (of a menu
screen, etc.) for
10 minutes, display is automatically
turned off (switched to a blue background) to prevent
image burn-in due to prolonged display of an unchanging
image.