Philips CDC771V - Manual (Page 10)

PLAYBACK (PLAY^)
m
3
in
55• *
3 *
PLAYING A NORMAL PLAYBACK (PLAY ►)
The display shows the number of the current CD.
U I 5E E
Press PLAY ► 9 to start playback.
RERU lights up and play starts from the first available CD.
The CD number indicator (1-5) always shows what CD is being played (► x flashes).
The track being played and its elapsed playing time are shown under TRACK and TRACK TIME. See ‘CALLING UP
INFORMATION ON THE DISPLAY' if you wish to see other information on the display.
j - r«A^ ___ rvt.
D-‘3D
ТЯ«:
D:D3
Play v/ill stop after all CDs have been played.
Press POWER 1 to switch the changer off.
NOTES!
You can also press PLAY ► 9 immediately after inserting the CDs; the compartment then closes automatically and play
starts from the first available CD.
Use the PREFERRED POSITION in the CD compartment if you wish to insert only one CD and then start play by pressing
the QUICK PLAY button 15. Play will then start immediately with the inserted CD.
You can interrupt playback by pressing PAUSE ii 6 , PAUSE then lights up. Press PLAY ► or PAUSE ii to restart.
If you press QUICK PLAY ► during play, the current track will start again from the beginning.
You can stop playback by pressing STOP ■ 8 .
If you press OPEN/CLOSE 19 during play, the CD compartment will open while play continues. The three CDs outside
the changer may now be changed without playback being interrupted.
SELECTING ANOTHER TRACK DURING PLAY ►»!) SEARCHING FOR A PASSAGE USING AN INDEX +/-
Press or 1 « 14 {less than 0.5 seconds) until the
desired track number appears under TRACK.
& В
130
- The music stops and a moment later the selected track
begins to play.
NRDNB TRREH Lights up when you select a non-existent track
number. You can also select the track by using the ^ 14
button on the remote control
SELECTING ANOTHER CD DURING PLAY (DISC SELECT)
• Key in the desired CD number.
- The music stops and a moment later the selected CD
begins to play.
NRDNB M5E lights up if you select a non-existent number.
You can also select the number by using the DISC button 2
on the remote control.
SEARCHING FOR A PASSAGE DURING PLAY (h^ ►»!)
• Hold 14 down to search backwards to the beginning.
• Hold 14 down to search forwards to the end.
The searching speed is determined by how long a key is
pressed:
- the first 2 seconds fairly slowly, with sound;
- then at the maximum speed, with no sound.
If you reach the end of the last track and release ►►), play will
resume a few seconds before the end of the CD. You can
search for a passage by using the 19 button on the
remote control.
You can locate a particular point in a track during play, (only
for indexed discs).
• Press INDEX +/- repeatedly, until you find the point during
play.
NOTE!
Index is a number that divides a track or a disc into some
sections.
STARTING WITH A PARTICULAR CD (DISC SELECT)
• Key in the required CD number.
- If the CD compartment was open, it will now close
- Play starts from the selected CD.
NRDNB UI5E lights up if you select a non-existent number.
You can also select the number by using the DISC button 2 on
the remote control.
STARTING WITH A PARTICULAR TRACK
(DISC SELECT. 1« and PLAY ►)____________________
• First select the number of the required CD using DISC
SELECT2 or DISC 2 on the remote control.
- If the CD compartment was open, it will now close.
• Then select the (track) number by using or 14
(press less than 0.5 seconds).
• Press PLAY ► 9.
- Play starts from the selected track.
NRDNB TRREK lights up when you select a non-existent
track number.
10