Flash setting, Self-timer, Burst – Philips SIC 4523 User Manual
Page 9: Flash setting self-timer burst
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
.
Flash Setting
1. Under Still mode.
Press OK button directly to change the flash mode-
auto/ red-eye reduction/ off/ force on.
The green LED light would quick blinking until the
flash is fully charged.
flash
force on
. red-eye reduction
off
0100 B
ft*
ca
♦*
Self-timer
1. Under Still mode,
2. Press Self-timer Button once to active Self-timer
function, the self-timer icon will be shown on TFT
display and press Shutter button to capture images by
seconds delay time.
Burst
1. Under Still mode,
2. Press Self-timer Button twice to active Burst function,
the icon on TFT will be changed to burst symbol, and
then press Shutter button to capture images
continuously.
2N1
1
.
2
.
Under Still mode.
Press Self-timer Button three times to active 2N1
function, the icon on TFT will be changed to 2N1
symbol. When the subjects can not in TFT display
totally, you may use this function. To aim the subject
on the left side, press Shutter button to take a picture
first and then aim the subject on the right side, press
Shutter button again to take a picture. The two
pictures will be combined to one.
16
17