Philips SIC 4523 - Manual (Page 7)

Attaching the Strap 3. Quick Start
1. The small loop goes through the strap holder.
2. Then the small loop goes through one clutch of the
loop again and pulls tightly.
Powering the camera ON/ OFF
Power ON
1. Press the Power Button to turn on or open the LCD
Monitor to turn on. The green LED light up indicate
power is on.
2. When the LCD Monitor has been activated, the
camera is ready to use and the green LED will be off.
Power OFF
1. Press the Power Button again to turn the camera off.
2. The camera also turns off automatically for power
save reason. To set the Auto Power Off, please refer
to page 41.
12 13